核心交换机配置

%LINK-5-CHANGED: Interface FastEthernet0/24, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to up

swc(config)#
swc(config)#
swc(config)#int g0/1
swc(config-if)#swi
swc(config-if)#switchport trunk en
swc(config-if)#switchport trunk encapsulation dot1q
swc(config-if)#ssw
swc(config-if)#swi
swc(config-if)#switchport mode trunk

swc(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up

swc(config-if)#eixt
^
% Invalid input detected at '^' marker.

swc(config-if)#exit
swc(config)#int g0/2
swc(config-if)#swit
swc(config-if)#switchport trunk encap
swc(config-if)#switchport trunk encapsulation dot1q
swc(config-if)#switch
swc(config-if)#switchport mode trunk

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to up

swc(config-if)#end

%SYS-5-CONFIG_I: Configured from console by console
swc#
swc#conf t
Enter configuration commands, one per line. End with CNTL/Z.
swc(config)#int f0/24
swc(config-if)#swi
swc(config-if)#switchport trunk enc
swc(config-if)#switchport trunk encapsulation do1q
^
% Invalid input detected at '^' marker.

swc(config-if)#switchport trunk encapsulation dot1q
swc(config-if)#swi
swc(config-if)#switchport mode trunk


%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to down
swc(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to up

swc(config-if)#exit
swc(config)#exit
swc#
%SYS-5-CONFIG_I: Configured from console by console

swc#
swc#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.

swc(vlan)#vtp domain campus
Changing VTP domain name from NULL to campus
swc(vlan)#vtp server
Device mode already VTP SERVER.
swc(vlan)#exit
APPLY completed.
Exiting....
swc#
swc#show vlan brief

VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
Fa0/13, Fa0/14, Fa0/15, Fa0/16
Fa0/17, Fa0/18, Fa0/19, Fa0/20
Fa0/21, Fa0/22, Fa0/23
1002 fddi-default active
1003 token-ring-default active

第1页下一页